Rotary Phase Converter Control Panels
- Integrated Motor Starter
- Smart Digital Starting Circuit
- Phase and Power Loss Protections
- CNC Voltage Balanced
- Pilot Light Indicator & Emergency Stop
- Effortless Installation
- Quick Block Wire Connections
- Power Factor Corrected
- Made in the USA
- Lifetime Warranty
Control Panel Features
- Built-In Motor Starter with Start/Stop Switch
- Digitally Controlled & Protected Start Circuit
- Complete Phase Power Failure Protection
- CNC Voltage Balancing
- Power “ON” Indicator Light
- Easy Installation
- Distribution Block Connections
- Power Factor Corrected
- Motor Control Panels Made In the USA
- Lifetime Warranties
Available Upgrades
- UL Listed Control Panels
- Wireless Remote Starter
- Wired Remote Switches
- 480 Volt Control Panels
- Automatic Controls
- Power Time Delays
- Plugs and Outlets
Add Your 3 Phase Motor (Required)
- Add your 3 phase motor to the Pro-Line CP motor control panel to make a rotary phase converter. Requirements for Idler Motor:
- T-Framed (Newer then 1965)
- 2 Pole (3400-3600 RPM) or 4 Pole (1700-1800 RPM)
Note:
All amperage in table reflect 208 to 250 volt usage
Pricing includes Rotary Phase Converter Control Panel only
A 3 phase idler motor must be added to the control panel to make a complete rotary phase converter
Quick Sizing Guidelines for the Phase Converter Control Panels
| Phase Converter Model | Motor Loads (Horsepower) | CNC, Resistive & Inductive Loads | Phase Converter Model | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Easy | Med | Hard | Very Hard | Total Amps | Total kVA | Total kW | Spindle HP | ||
| CP-3 | 2.5 | 2 | 1.5 | 1 | 4 | 1.4 | 1.1 | 1.5 | CP-3 |
| CP-5 | 3 | 3 | 2 | 1.5 | 7 | 2.4 | 1.7 | 2.5 | CP-5 |
| CP-7 | 5 | 5 | 3 | 2.5 | 11 | 4.5 | 2.2 | 3 | CP-7 |
| CP-10 | 7.5 | 6 | 5 | 4 | 15 | 6 | 3.7 | 5 | CP-10 |
| CP-15 | 10 | 7.5 | 6 | 5 | 20 | 8 | 5.6 | 7.5 | CP-15 |
| CP-20 | 15 | 12 | 10 | 7.5 | 25 | 11 | 7.7 | 10 | CP-20 |
| CP-25 | 20 | 15 | 12 | 10 | 30 | 13 | 9.5 | 12 | CP-25 |
| CP-30 | 25 | 20 | 15 | 10 | 37 | 15 | 11.8 | 15 | CP-30 |
| CP-40 | 30 | 25 | 20 | 15 | 50 | 21 | 15.5 | 20 | CP-40 |
| CP-50 | 40 | 30 | 25 | 20 | 61 | 25 | 21.5 | 25 | CP-50 |
| CP-60 | 50 | 40 | 30 | 25 | 72 | 30 | 26.5 | 30 | CP-60 |
Videos about Installation and using the Sizing Tables
Complete Details of Features
Built-In Motor Starter with Start/Stop Switch
- Self-contained built-in magnetic motor starter
- Money saving feature because every rotary phase converter needs a starting mechanism
- Start/Stop switch ideally located on the front of the rotary phase converter control panel for easy access and where it should be
Digitally Controlled & Protected Start Circuit
- The latest in solid state technology
- Patented Differential Voltage Sensing
- Safety Timer – times out to eliminate capacitor failure
- Our Pro Line Rotary Phase Converters are the only phase converters where this technology is available
Complete Phase Power Failure Protection
- Built in protection protects the rotary phase converter and your equipment in the event of a power loss
- During a black out, the Pro-Line Rotary Phase Converter shuts down all 3 legs of power
- Some brands only shut down the generated leg and can cause single phasing when power resumes
CNC Voltage Balancing
- CNC Voltage Balancing allows you to run even the most sensitive machines
- Voltage balanced phase-to-phase to within 5% or better
- The Pro Line Rotary Phase Converter offers the largest voltage balanced range on the market
Power “ON” Indicator Light
- Shops are a noisy place. This bright light on the front panel lets you know your Pro Line Rotary Phase Converter is up and running
Easy Installation
- Removable back plate design makes the rotary phase converter control panel enclosure light and easy to install
- Terminal block connections make wiring a snap
- Knockout placements on the bottom or right hand side for convenient wire access
Power Distribution/Terminal Connection
- Simply strip, place and tighten wires
- Generously oversized power distribution blocks make wiring a Pro Line Rotary Phase Converter a snap
Made In the USA
- Pro Line Rotary Phase Converters are proudly made in Wisconsin
- Built by a UL 508A Panel Shop(Not every panel is UL listed)
- Clean design makes for easy inspections
- Din rail mounted components and twist and release capacitors
Add your 3 Phase Idler Motor (Required)
Requirements for your 3 phase idler motor:
- T-Framed (Newer than 1965)
- 2 Pole (3400-3600 RPM) or 4 Pole (1700-1800 RPM)